15
PHONE BASICS AND MANAGING CALLS
SWITCHING THE PHONE ON AND OFF
Press and hold .
MAKING CALLS
Check that phone is switched on, signal strength icon displays at least one bar , and
Vodafone logo displays before dialling a call.
Type in the Phone Number to Dial
1. From standby mode, enter the area code and phone number, and press .
2. To end the call, press
.
Use a Contact Card to Dial
From Contacts menu:
1. Open Contacts List.
2. Scroll to desired name card, press .
• If the card has several phone numbers stored, select the one you wish to dial.
To add information to your Contacts List, see page 30.
Use a SIM Directory Entry to Dial
From Contacts menu:
1. Open Contacts List.
2. Scroll to SIM directory view.
3. Scroll to desired name, press .
To add names and numbers to your SIM directory, see page 34.
Speak the Name to Dial
To dial by saying the name of the person you wish to call:
1. Press and hold .
Note: If your SIM card is PIN protected, your PIN code will be requested. Enter the PIN code
and press
OK
.
See Security Settings on page 111.
Note: To erase a digit, press .
During a call, scroll or to adjust earpiece volume.
Warning: Closing the flip during a call will end the call
, when set to default. To set the phone to
keep the call connected when you close the flip, see Open to answer/end in Call
Settings on page 108.
To Next Page
Loading...
