29
2. On the HOME screen, use ◄ / ► to highlight VIDEO, and then
press ENTER. A list of all video files found on the memory source is
displayed.
3. Use ▲ / ▼ to highlight the video you want to view, and then press
ENTER.
4. The video will begin to play.
5. Press EXIT to stop viewing the video and return to the file list. To play
another video, repeat step 3.
6. Press EXIT again to return to the HOME screen.
Adjust the Volume
Use “+” and “-” on the remote control to adjust the volume on the DPF.
Video Playback Mode
There are three playback modes that you can set in the DPF:
• No Repeat – play a selected video only once.
• Repeat Single – play a selected video continuously until you stop it.
• Repeat All – play all video files on the memory source continuously
until you stop them.
Set Video Playback Mode
1. On the HOME screen, use ◄ / ► to highlight VIDEO, and then
press ENTER. A list of all video files on the memory source is
displayed.
2. Press SETUP.
3. Use ▲ / ▼ to highlight Video Playback Repeat and then press
ENTER.
4. Use ▲ / ▼ to highlight your desired mode and then press ENTER.
5. Press EXIT to return to the video file list.
6. To watch a video now, use ▲ / ▼ to highlight the video and then
press ENTER.
To Next Page
Loading...
Need help?
General
