INOXPAN S.L. EN - 12
PROGRAMMING COOKING TIME AND COOKING END TIME
1. Touch or until the symbol on the display starts flashing, then press . The
indication ‘00:00’ will appear on the display
2. Select the cooking time by touching or . Next, a double beep will sound, the remaining
time will appear on the display and the symbol will flash slowly.
3. Touch or until the symbol on the display starts flashing, then press . You will
see the expected completion time on the timer display
4. 4. Select the cooking end time by touching or . Next, a double beep will sound and the
current time will be displayed on the display.
5. Select a cooking function and temperature. The oven will remain disconnected with the and
symbols lit up. The oven is now programmed.
6. When it is time to start cooking, the oven will turn on and will operate for the programmed cooking
time.
7. While cooking, the cooking time remaining will be displayed and the symbol will flash slowly.
8. When the cooking time is up, the oven will turn off, a buzzer will sound, and the symbol will
flash quickly.
9. Touch any sensor to stop the buzzer and turn off the symbol. The oven will switch on
again.
10. Set the controls to the position to turn off the oven
You can change the remaining cooking time at any time by touching or until the symbol
starts to flash quickly. Now press to change the time.
To Next Page
Loading...
