AUTONOMOUS TRACKER PANDORA FINDER USER MANUAL
10 11
GETTING STARTED
WARNING! THE ONWER SHOULD MONITOR THE STATUS AND
ACCOUNT BALANCE OF THE SIM-CARD INSTALLED IN THE
DEVICE. IF THE SIM-CARD IS LOCKED OR DEFECTIFE, THE
FUNCTIONALITY OF THE TRACKER WILL BE UNAVAILABLE.
STEP 1 – Create and account and add your tracker
In order to use our online services pandora-on.com and mobile apps
Pandora Online (Android), Pandora Pro (iOS), it is required to create an
account and add your device to your account. Follow the “Registration”
procedure” on pandora-on.com or in mobile apps Pandora Online or
Pandora Pro to create an account. The data created at the registration
stage (login – your email address, password – your own password)
is used to login to the account. An email with the conrmation link
will be sent to your e-mail address after the registration procedure is
completed. The registration of the account will be completed after you
follow the provided link.
WARNING! IF YOU HAVEN’T RECEIVED THE CONFIRAMTION
E-MAIL, CHECK THE SPAM FOLDER OR FOLLOW THE “FORGOT
PASSSWORD” PROCEDURE ON THE MAIN PAGE OF PANDO-
RA-ON.COM
Web-service: pandora-on.com
The mobile apps can be downloaded from the appropriate app store:
App Store (iOS) – Pandora Pro;
Google Play (Android) - Pandora Online.
WARNING! MINIMUM REQUIREMENTS FOR MOBILE DEVICES:
ANDROID V4.4; IOS V10.
STEP 2 – Add the tracker to your account.
Login to the web-service pandora-on.com or mobile app Pandora
Online/Pandora Pro with the specied data (email address and your
own password). Proceed to the “Add a device/Add a system” window
and enter the LOGIN and PASS written on the Owner’s card and add the
device. You will get access to the tracker status and settings after adding
the device to your account
STEP 3 – Prepare the device for operation
Carefully disassemble the device and install batteries keeping in mind
the correct polarity. Assemble the tracker keeping the original layout of
the parts. The tracker is in the “Transportation” mode at the moment of
the shipment.
WARNING! WE RECOMMEND THAT YOU UPDATE FIRMWARE
OF THE TRACKER BEFORE THE NEXT STEPS.
STEP 4 – Set the owner’s phone number
Owner’ phone number is a phone number that is set by a user. The
device will exit the “Transportation” mode and enter the “Autonomous
beacon” mode after this phone number is programmed (see the
“TRACKER MODES” section).
NOTE! afTEr ThE OwNEr’s phONE is prOgrammEd aNd ThEN
Each TimE whEN ThE TrackEr wackEs up, iT will sEarch fOr gps
To Next Page
Loading...
Need help?
General
