Pantech Caper - BASIC OPERATION; CALLING A NUMBER FROM CONTACTS; ADJUSTING VOLUME; SPEAKERPHONE MODE

56
57
02
03
04
05
06
07
01
MY NAME CARD
A Name Card with the handset’s mobile number automatically appears.
EDIT MY NAME CARD
1. From the home screen, press the [ MENU ], then select 3. Contacts , 7. My
Name Card
.
2. Press the Left Soft Key
[ Edit ].
3. Edit the My Name Card options and then press the OK Key [
SAVE ] to save your
changes.
SEND MY NAME CARD
1. From the home screen, press the [ MENU ], then select 3. Contacts , 7. My
Name Card
.
2. Press the Right Soft Key
[ Send ] or press the SEND Key .
3. Select 1. TXT Message , 2. Picture Message , 3. Voice Message or 4. Via
Bluetooth
.
• TXT Message: Allows you to send TXT messages with the Name Card as an attachment.
1. Enter the recipient’s contact information and press the OK Key.
2. Enter your message in the Text eld and then press the OK Key [SEND].
•
Picture Message: Allows you to send picture messages with the Name Card as an
attachment.
1. Enter the recipient’s contact information and press the OK Key.
2. Compose your Picture Message and then press the OK Key [SEND]. Please refer to page
116 for more details on Picture Message.
• Voice Message: Allows you to send voice messages with the Name Card as an attachment.
1. Press the OK Key to start recording a voice memo and press the OK Key [STOP] to nish
recording.
2. Compose your Voice Message and then press the OK Key [SEND]. Please refer to page
117 for more details on Voice Message.
• Via Bluetooth: Allows you to send Name Card to another Bluetooth® device.
1. Press 1. Add New Device. If the Bluetooth power is switched o, the following message
will appear on the screen: “TURN BLUETOOTH POWER ON?”. Press the OK Key to select
Ye s.
2. When “PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE MODE” appears, press
the OK Key to start searching Bluetooth devices.
3. Press the Directional Key
up or down to select a desired device and press the OK Key
[PAIR]. Please refer to page 80 for more details on Bluetooth.
4. The handset may prompt you for the passkey. Consult the Bluetooth accessory (sold
separately) instructions for the appropriate passkey (typically “0000” - 4 zeroes). Enter
the passkey, then press the OK Key.
5. “Before Connecting To [Device Name]” will appear on the screen. Select Always Ask or
Always Connect and press the OK Key.