Pantech Caper - MEMORY FUNCTION; ONE, TWO, THREE - TOUCH DIALING

82
83
02
03
04
05
06
07
01
OPTIONS
1. From the home screen, press [ MENU ], then select 9. Settings & Tools ,
4. Bluetooth .
2. Select the paired device.
3. Press the Right Soft Key
[ Options ].
4. Select one of the following options, then press the OK Key.
• Remove Device: Removes a device from the pairing list.
• Rename Device: Renames a paired device.
•
Incoming Security: Sets permissions for connecting an incoming device.
•
Service Discovery: Searches for the services that the selected device supports.
• Device Info: Displays device information.
5. Or, press the OK Key to access 1. Send Name Card , 2. Send Picture , 3. Get
Name Card
, or 4. File Transfer . Select the desired option and press the OK Key
to access the following:
• Disconnect / Connect: Disconnects or reconnects the connected device.
•
Send Name Card: Allows you to send name cards stored in Contacts to a selected device.
1. Press the Directional Key up or down to highlight a desired contact or contacts,
then press the OK Key [
MARK ]. If you want to change your selections, press the OK Key
[
UNMARK ] to deselect your selections.
2. Press the Left Soft Key
[ Done ]. If you want to send all the name cards, press the
Right Soft Key
[ Send All ].
•
Send Picture: Allows you to send photos to a selected device.
1. Press the Directional Key up, down, left or right to highlight a desired photo or
photos, then press the OK Key [
MARK ]. If you want to change your selections, press the
OK Key [
UNMARK ] to deselect your selections.
2. Press the Left Soft Key
[ Done ]. If you want to send all the photos, press the Right
Soft Key
[ Send All ].
• Get Name Card: Get name cards from the selected device.
•
File Transfer: Allows you to get les from the selected device.
SETTINGS
MY PHONE NAME
To edit the Bluetooth® name of your phone:
1. From the home screen, press [ MENU ], then select 9. Settings & Tools ,
4. Bluetooth .
2. Press the Right Soft Key
[ Options ].
3. Press
1. My Phone Name .
4. Use the QWERTY Keypad to enter a new custom name.
5. Press the OK Key [
SET ] to save and exit.
DISCOVERY MODE
To set whether your device is able to be searched for by other Bluetooth devices in
the area:
1. From the home screen, press [ MENU ], then select 9. Settings & Tools ,
4. Bluetooth .
2. Press the Right Soft Key
[ Options ].
3. Select
2. Discovery Mode .
If Bluetooth power is not on, it will be turned on automatically.
4. Select On or O , then press the OK Key [ SET ].
SUPPORTED PROFILES
To view brief descriptions of the proles supported by the phone:
1. From the home screen, press [ MENU ], then select 9. Settings & Tools ,
4. Bluetooth .
2. Press the Right Soft Key
[ Options ].
3. Select 3. Supported Proles .
4. Select one of the following proles, then press the OK Key [
VIEW ].
Headset / Handsfree / Phonebook Access / Object Push / File Transfer