Pantech Crux - Installing the Battery

16
02
03
04
05
06
07
08
01
17
Message Icons
Unread Message Received Read Message
Read Message Multiple Message Sent
Unread EMS Message Delivered
Read EMS Multiple Message Delivered
Unread MMS Notication
Sent Message Delivery
Failed
Read MMS Notication Multiple Message Failed
Unread Corrupt Message Pending Message Send
Read Corrupt Message Multiple Message Pending
Unread Wap Push Incomplete Delivery
Read Wap Push
Multiple Message
Incomplete
Unread MMS Text Message Draft
Read MMS Picture Message Draft
Sent Message Priority
Received Unread Message Message Locked
INSTALLING THE BATTERY
1. Slide the battery into the slot (1) by aligning the
contacts and push down (2) until you hear the “click.”
Correct Incorrect
2. Align the cover tabs with the slots on the back of the
phone and slide the battery cover onto the unit until
it snaps into place.
If the battery is not correctly placed in the
compartment, the phone will not turn on and/or the
battery may detach during use.
Correct Incorrect