Panther 1650 - Page 5

PANTHER
MODEL PAGE NO.
1350 / 1650 3
SR. SECTION DESCRIPTION PAGE
1 Installation 1.1 Machine specifications. 6
1.2 Legend. 8
1.3 List of Accessories. 11
1.3.1 Standard Accessories. 11
1.3.2
Optional Accessories (to be order
along with M/c.)
12
1.3.3
Optional Accessories (Retro fitting
possible)
12
1.4 Charts. 13
1.4.1 Speed chart for 8 spindle speed. 13
1.4.2 Speed chart for 16 spindle speed. 13
1.4.3
Thread and feed chart for 4 TPI lead
screw.
14 A
1.4.3.1
Thread chart for inch and metric
threading.
14 A
1.4.3.2 Module chart. 15 A
1.4.3.3 D.P. Chart. 15 A
1.4.4
Thread and feed chart for 6 mm
PITCH lead screw.
14 B
1.4.4.1
Thread chart for inch and metric
threading.
14 B
1.4.4.2 Module chart. 15 B
1.4.4.3 D.P. Chart. 15 B
1.5 List for change gears. 16
1.5.1 For 4 TPI lead screw. 16
1.5.2 For 6 mm PITCH lead screw. 16
1.6 Lubrication chart. 16
2
Installation
2.1 Lifting the machine. 17
2.2 Unpacking and cleaning. 17
2.3 Foundation. 17
2.4 Leveling. 18
2.5 Electric connections. 19
I N D E X