127
Some parts of the printer are still hot within a short time after use. When opening the front
cover or rear cover to clean the parts inside the printer, please do not touch the parts in the
shaded area as shown in the following picture, so as to avoid burns.
• When removing the laser toner cartridge, put the cartridge in a protective bag or wrap
it with thick paper to avoid direct light damaging the photosensitive drum.
7. Gently wipe the dustproof mirror of laser scanning surface with a cotton swab or a dry and
lint-free soft cloth with a little alcohol.
8. Clean the inside of the printer by using a dry and lint-free cloth to gently wipe the shaded area
as shown in the picture below.
To Next Page
Loading...
Need help?
General
