Pantum M6503 Series User Manual

65
7.1.5. Auto shut-off setting
"Auto shut-off setting" to set off condition and off delay of printer.
1) Press "Menu" button to enter the menu interface.
2) Press direction pad "▲" or "▼" to select "System Setting" and press OK button.
3) Press direction key "▲"or "▼" to select options of "Auto off set", press "OK" to set off condition
and off delay.
M6200/M6500/M6550 Series
M6600 Series
Note:
Set auto off condition:
• Shutdown under no-port state (default configuration): no port is connected, Wi-Fi
function deactivated, printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.
• Default automatic shutdown time: 10 hours

Pantum M6503 Series Specifications

General

Brand	Pantum
Model	M6503 Series
Category	All in One Printer
Language	English