Pantum P2500W Plus Series User Manual

14
For macOS:
• Double-click on “Pantum XXX Series_Mac_Driver”–“Pantum Install Tool”.(The XXX in Pantum
XXX Seriesrefers to product model.)
2. Read and agree to the terms contained in the End User License Agreement and the Privacy
Policy, click the “Next” button in the lower right corner of the interface to enter the driver installation
interface.
3. For Windows, follow Step 4. For macOS, enter PC password before proceeding to Step 4.
4. Select the printer installation method according to your needs, and click "One-click Installation"
below it.
If the button below the installation method is "Not Connected", please click " " to guide you
to complete the connection.
Note:
• After you click "One-click Installation", if the following interface pops up, please select
the printer you need to install according to the network IP address or host name of
your printer. (For information on how to obtain the IP address or host name of the
printer, you may refer to Section 8.1.1.3, and print the "Network Configuration Page" to
check.)

Pantum P2500W Plus Series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	15, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Processor Speed	600 MHz
Memory	128 MB
Mobile Printing Capability	Yes (Pantum App)
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
Connectivity	Wi-Fi, USB 2.0
Media Sizes Supported	A4, A5, A6, Letter, Legal
Media Types Supported	Plain, Thick, Cardstock, Label, Envelope, Thin
Dimensions	337 x 220 x 178 mm
Power Consumption (Printing)	370 watts
Recommended Monthly Volume	2, 000 pages
Power Consumption (Sleep)	Less than 2W