To Next Page

To Previous Page

II. Installation in Wi-Fi Direct mode

1. Turn the power of printer and computer on.

2. Connect computer to the Wi-Fi Direct network of the printer (please refer to Section 5.2.2 for

setup method).

3. Place the attached installation CD in the computer CD-ROM:

• Windows XP system: automatically run the installation procedure.

• Windows 7/Server 2012 system: Pop up "Autoplay" interface, click “Autorun.exe” to run the

installation procedure.

• Windows 8 system: When the " DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the pop-up window, then click "Autorun.exe" to run the

installation procedure.

• Windows 10 system: When the "DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the window, then click "Autorun.exe" to run the installation

procedure.

Note:

• Some computers may be unable to auto play the CD beacase of system configuration.

Please double click "Computer" icon, find "DVD RW driver", then double click "DVD RW

driver" to run the installation procedure.

4. Read and agree to the terms contained in the End User License Agreement and the Privacy

Policy, click the “Next” button in the lower right corner of the interface to enter the driver installation

interface.

5. Click on the "More setup methods" at the bottom of driver installation interface, and enter into

manual intallation interface.

6. Please select installation language and printer model.

7. Select "Wireless network connection" and click on "Install".

Pantum P2500W Plus Series User Manual

Questions and Answers: