Pantum P2500W Plus Series User Manual

23
8. Select “No, the printer has been connected to wireless network” on the wireless setup window
popping out, and then click “Next”.
9. The installation software will search the printer automatically and the searching process may
need some time.
10. Select the printer needs to be connected and click “Next”.
Note:
• If the printer you need to connect is not in the list of printers searched, please click
“Refresh” to search again.
• When the printer IP address changes under printer driver installed with host ID , you can
also directly print without re-installing the driver. If you need to install the printer driver with
the host ID, please check the option "Install the printer in the list with host ID".
• If IP address or host name is added manually, you need to know the IP address of the
printer connected or host name. If they are not made clear, please print the “NetConf Pg”
and view “IP Address” and “Host name” (Please refer to Section 8.1.1.3).

Pantum P2500W Plus Series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	15, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Processor Speed	600 MHz
Memory	128 MB
Mobile Printing Capability	Yes (Pantum App)
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
Connectivity	Wi-Fi, USB 2.0
Media Sizes Supported	A4, A5, A6, Letter, Legal
Media Types Supported	Plain, Thick, Cardstock, Label, Envelope, Thin
Dimensions	337 x 220 x 178 mm
Power Consumption (Printing)	370 watts
Recommended Monthly Volume	2, 000 pages
Power Consumption (Sleep)	Less than 2W