Pantum P2500W Plus Series User Manual

28
4. Enter the password of the PC, and click on “OK”.
5. Click on “More setup methods” at the bottom of the setup interface for access.
6. Click on "Off-line installation" on the lower left.
7. The software installs the driver automatically and the installation process may need some time.
The duration is related to your computer configuration, please wait patiently.
8. Install complete. Please finish printer adding as guided or refer to Section 3.2.2.2.2.5.
3.2.2.2.2.5.. Add printer to macOS system
I. Add up the printer via USB
1. Connect the printer to computer with USB cable and then turn power on.
2. Enter the “System Preferences” – “Printers & Scanners” of computer.
3. Click button to select “Add Printer or Scanner”.
4. Select printer and then select the corresponding printer mode from the “Use” menu popping out.
5. Click “Add”.

Pantum P2500W Plus Series Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	15, 000 pages
Input Capacity	150 sheets
Output Capacity	100 sheets
Processor Speed	600 MHz
Memory	128 MB
Mobile Printing Capability	Yes (Pantum App)
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	22 ppm (A4)
Connectivity	Wi-Fi, USB 2.0
Media Sizes Supported	A4, A5, A6, Letter, Legal
Media Types Supported	Plain, Thick, Cardstock, Label, Envelope, Thin
Dimensions	337 x 220 x 178 mm
Power Consumption (Printing)	370 watts
Recommended Monthly Volume	2, 000 pages
Power Consumption (Sleep)	Less than 2W