Pantum P3000 Series - Page 33

2) Paper tray setting on control panel
Note: The paper size settings of standard tray, multi-function tray, and optional tray can be
done on control panel. Here, we take the setting of standard tray for example.
Press the “menu” button to enter into the menu setting interface.
Step1: Press the direction key “
▲
” or “
▼
” to select “2. Paper tray settings” option. Press “OK”
button.
Step2: Press the direction key “▲” or “▼” to select “2. Standard tray” option. Press “OK” button.
Step3: Press the direction key “▲” or “▼” to select “2. Paper sheet size” option. Start setting.
System settings
2. Paper tray
settings