Pantum P3010DW Series User Manual

Please note the following matters when selecting the print media:
1.
Desired print effect: The print media selected should meet the requirement of the print tasks.
2. Surface smoothness: The smoothness of the print media may affect the sharpness of the print
outcome.
3.
Some print media may meet all the use guidelines contained herein, but they still can not
bring satisfactory effect.This may be due to incorrect operation, inappropriate temperature and
humidity,or other factors beyond the control of Pantum. Before purchasing large quantities of print
media,make sure that the print media meets the specifications specified in this User Guide.
2.2.Special Paper
This printer supports using the special paper for printing. Special paper includes: label
paper,envelope, transparent film, thick paper,carton paper, thin paper.
Note： • When using special paper or print media, be sure to select matched print type
and size in the print settings so as to get the best print effect.
Please observe the following standards:
Types of
Print Media
Correct Practices
Incorrect Practices
Label
Paper
Use labels with no
exposed lining paper only.
Labels shall be put flat when using.
Use labels of full sheet only.
There is no guarantee that all the
labels in the market can meet
corresponding requirements.
Use wrinkled, blistered or damaged
label papers.
Envelope
Envelopes should be loaded
evenly.
Use wrinkled, nicked, stuck or damaged
envelopes.
Use envelopes with clips, snaps,
windows, or coated linings.
Use envelopes with self-adhesive
stickers or other synthetic materials.
Transparent
Film
Only use transparent films
approved for use in laser
printers.
Use transparent print media that is not
suitable for laser printers.
Thick Paper,
carton paper
Only use heavy paper that is
approved for use in laser
printers and meets the weight
specifications of this printer.
Use the paper whose weight is more
than the specification of the media
recommended for this printer, unless the
paper is approved for use in this printer.
12

Pantum P3010DW Series Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Automatic
Maximum Monthly Duty Cycle	60, 000 pages
Paper Input Capacity	250 sheets
Operating Systems Compatibility	Windows, macOS, Linux
First Print Out Time	Less than 8.5 seconds
Processor	600 MHz
Memory	128 MB
Print Speed	30 ppm
Connectivity	USB, Ethernet, Wi-Fi
Paper Output Capacity	150 sheets
Media Types Supported	Plain, Thick, Thin, Transparency, Label, Cardstock
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal, Executive, Envelope
Dimensions	354 x 334 x 232 mm
Weight	6.8 kg