9.2.Network Settings
You can check or set network status via network setting.
1) Press "Menu" to enter the Menu Settings interface.
2)
Press direction key “▲” or “▼” and select “3. Network Set” option and press “OK”
key to set
“Wired network setting”, “wireless network setting” and “Wi-Fi Direct”.
Note：
• To set IP address, subnet mask and gateway, press direction key “▲” to
circularly accumulate values from “0-9”, press direction key “▼” to circularlly
input the position from left to right, press “OK” key to save setting and press
“Return” key to return to the previous menu.
To Next Page
Loading...
