Pantum P3010DW Series User Manual

4.
Raise the output tray to avoid the printed paper from slipping and falling, or
immediately remove the printed document after the printing is complete.
Note： • It is recommended that you raise the output tray to prevent the paper
from slipping and falling after printing. If you choose not to raise the output tray,
we recommend that you immediately remove the printed paper from the printer.
• If more than 250 pages (80 g/m²) are put inside the auto feed tray at one time,
paper jam or paper feed failure will be led to.
•
If carrying out single-sided printing, please make sure that the side to be printed
(the blank side) is face down.
2.3.2.Install manual feed tray
1.
Raise the output tray to avoid the printed paper from slipping and falling, or immediately
remove the printed document after the printing is complete.
2. Open manual feed tray
14

Pantum P3010DW Series Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Automatic
Maximum Monthly Duty Cycle	60, 000 pages
Paper Input Capacity	250 sheets
Operating Systems Compatibility	Windows, macOS, Linux
First Print Out Time	Less than 8.5 seconds
Processor	600 MHz
Memory	128 MB
Print Speed	30 ppm
Connectivity	USB, Ethernet, Wi-Fi
Paper Output Capacity	150 sheets
Media Types Supported	Plain, Thick, Thin, Transparency, Label, Cardstock
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal, Executive, Envelope
Dimensions	354 x 334 x 232 mm
Weight	6.8 kg