Pantum P3300 SERIES User Manual

48
Note：
• If you do not know the SSID of access point (wireless router), please click “Print
Wireless Network Information Page” to view the SSID of the needed access point
(wireless router).
• If the printer cannot be used normally after wireless network setup is finished, please
install the drive again.
3. Use WPS connection .
Select “No, I don't have a USB cable” in the interface below and then click “Next”.
1) Use WPS method to perform steps below to start wireless network on printer. (Please refer to
Chapter 5.1.2 for detailed WPS configuration)

Pantum P3300 SERIES Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Media Types	Plain, Thick, Thin, Transparency, Cardstock, Label
Media Sizes	A4, A5, A6, B5, Letter, Legal, Executive, Envelope (DL, C5, B5)
Operating Systems Compatibility	Windows, Linux, Mac OS
Media Weight	60 - 163 g/m²