Pantum P3300DW Series User Manual

3.2. Mac system driver installation
• Driver installation under Mac system is divided into 2 steps, driver installation and adding a
printer. If you are going to print in AirPrint mode, there is no need to install a driver and you
just need to add a printer directly.
• When you are installing a driver with wired or wireless network, you may need to know the
Bonjour name of printer. Please print the “Network setup page” to view it. (Please refer to
Chapter 9.4).
3.2.1.Driver installation
Mac 10.11 is taken as the example in the following operation. The information on your
computer screen may differ because of multiple operating systems.
1. Turn the power of printer and computer on.
2. Insert the CD companying with printer in the CD driver of your computer, and double click
Pantum XXX Series installation package. (XXX in Pantum XXX Series represents product
model.)
3. Click “Continue”.
4. Read licensing agreement and then click “Continue”.
39

Pantum P3300DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet, Wi-Fi
Output Capacity	150 sheets
Processor Speed	350 MHz
Memory	256 MB
Operating Systems Supported	Windows, Mac OS, Linux
Input Capacity	250 sheets
Media Sizes Supported	A4, A5, A6, B5, Legal, Letter, Executive, Envelopes (DL, C5)
Media Types Supported	Plain, Thick, Thin, Cardstock, Label, Envelope
Mobile Printing	Pantum App, AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)