Pantum P3300DW Series User Manual

9.1.2.Sleep Time Setting
Sleep mode can reduce the energy consumption of printer effectively,
and “Sleep time setting” can be made in the idle time before the device enters sleep mode.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "1.System Setting" option.
3)
Press direction key “▲” or “▼” to select “2. Sleep time Set” option, and press “OK” key
to set the corresponding sleep time.
Note： • In sleep mode, the printer can be woken up by pressingany key or sending
•
Sleep time of network printer can be set with the embedded Web server
(Please refer to Chapter 6.2.3.2).
9.1.3.Toner Save
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "1.System Setting" option.
3)
Press direction key “▲” or “▼” and select “3. Toner Save ” option and press “OK”
key to turn on/off this mode.
You can select the save toner mode which can reduce toner consumption and reduce
printing cost. When save toner mode is “on”, the printed color will be lighter.
Save toner mode is “off” by default.
printing work.
74

Pantum P3300DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet, Wi-Fi
Output Capacity	150 sheets
Processor Speed	350 MHz
Memory	256 MB
Operating Systems Supported	Windows, Mac OS, Linux
Input Capacity	250 sheets
Media Sizes Supported	A4, A5, A6, B5, Legal, Letter, Executive, Envelopes (DL, C5)
Media Types Supported	Plain, Thick, Thin, Cardstock, Label, Envelope
Mobile Printing	Pantum App, AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)