Pantum P3300DW Series User Manual

7.7.Mute printing
1. Enter the “Start menu” – “Control Panel” –view “Devices and Printers”.
2. Right click printer and select “Printer properties” in the pull-down menu.
3. Enter the “Secondary Settings” option.
4. Tick “Mute printing” and click “Ok” to finish setup.
5. Open the printing work from the App, select a printer of the corresponding model and then
6. Click “Print” to realize mute printing.
Note：
• Printers with LCD control panel can be set to mute printing with keys on control
If the Mute Printing is set, the printing noise will be reduced but the printing will slow down
to some extent.
The operating steps of mute printing are as follows (applicable to printers that are
installed via USB connection)
Windows 7 is taken as the example in the following operation. The information on your
computer screen may differ because of multiple operating systems.
set up printing according to needs.
panel directly,please refer to Chapter 9.1.4.
64

Pantum P3300DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	Up to 1200 x 1200 dpi
Duplex Printing	Automatic
Connectivity	USB 2.0, Ethernet, Wi-Fi
Output Capacity	150 sheets
Processor Speed	350 MHz
Memory	256 MB
Operating Systems Supported	Windows, Mac OS, Linux
Input Capacity	250 sheets
Media Sizes Supported	A4, A5, A6, B5, Legal, Letter, Executive, Envelopes (DL, C5)
Media Types Supported	Plain, Thick, Thin, Cardstock, Label, Envelope
Mobile Printing	Pantum App, AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)