Note:• If the printer you need is not shown in the list, please click “Refresh” button to
search again. If it is not found, please check if the printer and computer are in the
same network. (Please see Chapter 5.3 for how to check).
• When the printer IP address changes under printer driver installed with host ID ,
you can also directly print without re-installing the driver. If you need to install the
printer driver with the host ID, please check the option “Install the printer in the list
with host ID”.
7. After the installation, click “Print &Test Page” button. If your printer prints the test page
successfully, it means that you have installed the driver correctly.
3.1.1.3. Method III: Connect the printer via wireless network
Please check if the printer is connected with wireless network when installing the printer
driver software. If disconnected, please install it with reference to Chapter 3.1.1.3.1. If
connected, please install it with reference to Chapter 3.1.1.3.2.
Note: • You can print "Network configuration page" to confirm printer network connection
status to see if printer is connected with network (Please see Chapter 9.4 for how
to print).
3.1.1.3.1. The printer is not connected with wireless network
3.1.1.3.1.1. Congure wireless network via USB cable and install driver
Since some computers are not provided with wireless network function, this section is divided
into “Connect computer to router via Wi-Fi” and “Connect computer to router via wired
connection” to introduce installation process.
I. Connect computer to router via Wi-Fi
1. Computer is already connected to router via Wi-Fi.
2. Connect the printer to computer via USB cable, then power the printer on.
3. Place the attached installation CD in the computer CD-ROM:
• Windows XP system: automatically run the installation procedure.
• Windows 7/Vista/Server 2008 system: Pop up “Autoplay” interface, click “Autorun.exe” to
run the installation procedure.
• Windows 8 system: When the “ DVD RW driver” window pops up from the right top corner of
computer desktop, click anywhere in the pop-up window, then click “Autorun.exe” to run the
installation procedure.
• Windows 10 system: When the “DVD RW driver” window pops up from the right top corner
of computer desktop, click anywhere in the window, then click “Autorun.exe” to run the
installation procedure.
Note: • Some computers may be unable to auto play the CD beacase of system
configuration. Please double click "Computer" icon, find "DVD RW driver", then
double click "DVD RW driver" to run the installation procedure.
To Next Page
Loading...
Need help?
General