PT-B680 Series User Manual
3.5 Basic functions
3.5.1 Power on/off
Turn on the power switch to the I state. Turn off the power switch to the O state.
OFF ON
3.5.2 Print test
When the printer is initially installed or there is any problem with the printer, self-test procedure can be
executed to confirm the following status, firmware version, printer parameter setting, print quality, external
settings and other related setting information. If it is found after the self-test that there is no problem with
the printer, please check other devices or software. This function runs independently from other devices
or software.
◼ Print Self-test Page
In the power-on state, click the SET key to enter the main menu, click the Down key to select the third
configuration information option, click the SET key again to enter the configuration information page, click
the Down key to select the second option Print Self-Test Page, continue to click the SET key to print the
self-test page.
3.6 Paper Tear-off Direction
3.6.1 Paper Tear-off Direction
When the printer finishes printing, the paper will be torn off from top to bottom.
21
To Next Page
Loading...
Need help?
General
