PT-B680 Series User Manual
Safety Information
Before using the printer, please read the following precautions carefully to avoid personal
injury or equipment damage.
1. Safety Warning Signs
--------Warning: Must be observed to avoid personal injury or equipment damage.
--------Note: Give important information and tips for operating the printer.
2. Safety Precautions
Warning: Failure to comply with following instructions can cause serious injury or death.
1) Do not plug several products in one multi-outlet.
• This can cause overheating and fire.
• If the plug is wet or dirty, dry it or wipe it clean before use.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multi-outlets.
2) You must use only the supplied adapter.
• It is dangerous to use other adapters.
3) Do not pull the cable to unplug.
• This can damage the cable, which is the origin of a fire or a breakdown of the printer.
4) Do not plug in or unplug with your hands wet.
• This can cause electric shock.
5) Do not bend the cable forcibly or place it under heavy objects.
• A damaged cable can cause a fire.
Note: Failure to comply following instructions can cause slight wound or damage the appliance.
1) If you observe a strange smoke, odor or noise from the printer, unplug it before taking following
measures.
• Switch off the printer and unplug it.
• After the disappearance of the smoke, call your dealer to repair it.
2
To Next Page
Loading...
