Need help?Do you have a question about the ParaBody 807 BODYSYSTEM and is the answer not in the manual?
Critical safety precautions to follow before using the equipment.
Guidelines for medical clearance, equipment inspection, and safe operation practices.
Key assembly notes, required tools, and bolt measurement guide.
Attaching paraglide strips, U-pin, and spring pin assembly to the Wolff sleeve.
Connecting the bench frame to the Wolff sleeve and assembling the base leg.
Using bolts, washers, and lock nuts to securely connect the bench to the upright frame.
Attaching paraglide strips, grips, and saddles to upright tubes and dip tubes.
Sliding hinge tabs over the Wolff sleeve pin and securing the seat pad.
Attaching remaining hinge tabs to the back pad and Wolff sleeve pin.
Inserting end caps, roller pads, and securing the leg extension neck.
Assembling leg extension, bearings, bolt, washers, lock nut, and rubber bumper.
Adjusting bench frame for leg extension clearance when performing leg curls or extensions.
Setting the height adjustment bar for incline presses and dip exercises.
Recommendations for regular cleaning, daily inspection, and tightening connections.
Details warranty periods for frame, parts, cables, upholstery, and claim procedures.
Contact information for Life Fitness consumer division and international offices.
To Next Page
General
