Paradigm 100 - Page 13

Now, attach one Steel Heel Holder Bracket (7) and one Rubber Heel Holder (31) to one end of the
Rod (9). Slide the Rod (9) through the large round hole on the side of Adjustable Boom (3) as
shown, and attach the other Steel Heel Holder Bracket (7) and Rubber Heel Holder (31) to the other
end of the Rod (9). Secure the Rod (9) on the Adjustable Boom (3) with a Hex Head Bolt (11), Lock
Nut (16), and two Washers (27).
STEP 5:
Slide the Foot Bar (39) into the bottom of the Adjustable Boom (3) and align two of the holes on
the Foot Bar (39) with two holes on the boom. Secure the Foot Bar (39) in place using two Hex
Head Bolts (40), Lock Nuts (15), and four Washers (13).
11
31
7
9
11
16
3
27
27