5
You must have the following to connect your Paradigm product to
your network:
• A high-speed DSL/Cable modem or a fiber-to-the-home
broadband connection for reliable playback of music services
based on the internet. Note: Satellite internet services are
prone to playback issues due to fluctuating download rates.
• If your modem is not a modem/router combination you must
purchase and install a router into your home network before
proceeding.
• If you plan to use the DTS Play-Fi App on an Android or iOS
device or you are setting up a Paradigm product for Wi-Fi
streaming, you will need a wireless router.
• Have your network password ready before connecting the
Paradigm product to your network.
NOTE: To make the quickest connection, use a dual-band router
and connect your Paradigm Product to the 5 GHz network instead
of the 2.4 GHz Network.
NOTE: If your wireless connectivity is weak or not available,
connect your Paradigm product to your router with an ethernet
cable (not included).
TIP! Paradigm Premium Wireless Series products communicate
with wireless networks that support 802.11 g/n wireless
technology. For the fastest streaming performance, a network
that supports 802.11 n wireless technology is recommended. A
network supporting 802.11 b may be used, but it will effectively
stream to only one device equipped with DTS Play-Fi.
TIP! For superior performance connect your PC or NAS (Network-
Attached Storage) drive that holds your personal music library to
your network router using the provided Ethernet cable.
NETWORK REQUIREMENTS
SYSTEM REQUIREMENTS
• An Android device running Android 4.0 or later.
• An iOS device running iOS 8.0 or later.
• Devices running Bluetooth v2.1 or later.
• A Windows
®
PC running Windows
®
7, 8, 8.1, and 10.
To Next Page
Loading...
