Paradigm surflink - Streaming Audio; Interoperability with Other Accessories

TIP – To achieve better signal-to-noise performance,
a hearing professional can adjust (mute or attenuate)
your hearing instrument microphones during SurfLink
Remote Microphone use.
Streaming Audio
After SurfLink Remote Microphone powers on, it
automatically begins streaming audio to synced
hearing instruments. The LED slowly blinks blue to
confirm that audio streaming is active and SurfLink
Remote Microphone’s battery is operational.
When SurfLink Remote Microphone is turned off, it
automatically stops streaming audio.
The user can adjust streamed audio volume level
via their hearing instruments. The SurfLink Remote
Microphone does not contain an integrated volume
control.
Interoperability with Other Accessories
If you also use a SurfLink Mobile, then its phone
call streaming will take priority over the SurfLink
Remote Microphone audio stream. When a SurfLink
Mobile phone call stream ends, SurfLink Remote
Microphone’s audio stream automatically returns to a
hearing instrument.
1818
Operation