Esprit Keypads 9
3.11 Arming System A and B Separately
If your Access Code has access to System A:
If your Access Code has access to System B:
3.12 Stay Arming System A
Please refer to section 3.3 on page 6 for an
explanation of stay arming. Press the [
STAY/11] key
steadily for 2 seconds. With your system partitioned,
only System A will be Stay armed when the [
STAY/11]
key is pressed.
How do I arm Systems A and B simultaneously?
1. Enter your Access Code.
The [
STAY] AND [AWAY] key will flash. The READY light
will also begin to flash and the exit timer will begin to
countdown.
How do I arm System A?
1. Press the [
STAY] key.
2. Enter your Access Code.
The [
STAY] key will flash. The READY light will also
begin to flash and the exit timer will begin to countdown.
How do I arm System B?
1. Press the [
AWAY] key.
2. Enter your Access Code.
The [
AWAY] key will flash. The READY light will also
begin to flash and the exit timer will begin to countdown.
K6X6-EU12.fm Page 9 Tuesday, June 27, 2006 11:05 AM
To Next Page
Loading...
Need help?
General
