16 User’s Manual
Key [9] - Tamper/zone wiring failure
Key [9], if illuminated, means that there is a wiring
problem in one of your protected zones.
Key [11] - Fire/trouble
If the fire zone is cut, the fire zone key and trouble key
[11] will illuminate.
Most of these “trouble” conditions will be programmed
by your installer to be reported directly to your
monitoring station. Please make sure to contact your
alarm company, however, to ensure that repairs are
immediately made to your security system.
How do I reprogram the Timer?
1. Press the [
ENTER] key.
2. Enter the [
MASTER CODE] or [USER CODE 01].
3. Press the [
MEM] key.
4. Enter the new time using the 24-hour clock (ex:
8:30PM = 20:30).
5. Press [
ENTER].
K6X6-EU12.fm Page 16 Tuesday, June 27, 2006 11:05 AM
To Next Page
Loading...
Need help?
General
