Esprit E55 / E65 11
Keypad Lockout
Partition Programming
NOTE: When using a K636 keypad, only partition 1 is available. To use both partitions, use a K10V/H, K32, or K32I keypad.
Partition Timers
Refer to the Installer Quick Menu on page 39 for alternate entry/exit and bell cut-off timer programming.
[704] Keypad Options
Option OFF ON
[5]
Bell squawk when arm/disarm with a keypad
N Disabled N Enabled
[6]
Beep on exit delay
N Disabled N Enabled
[7] No exit delay beeps and no bell squawk when stay/sleep
arm
N Disabled N Enabled
Data Description
[716] ____/____/____ (000 to 255) minutes Keypad lockout delay (default 000)
[717] ____/____/____ (000 to 255) attempt before locking Keypad lockout counter (default 000)
[700] Partitioning
Option OFF ON
[1]
Partitioning
N Disabled N Enabled
[741] Partition 1 Options Bold = Default setting
Option OFF ON
[1] Auto-arm on time
Disabled N Enabled
[2] Auto-arm on no movement
Disabled N Enabled
[3]& [4]
Auto-arm arming mode
N See Table N See Table
[5] Switch to stay arming if no zone entry delay is opened
Disabled N Enabled
[6]
Follow zones become entry delay 2 when delay zone is
bypassed
Disabled N Enabled
[7]& [8] N/A N/A N/A
[742] Partition 2 Options
Option OFF ON
[1] Auto-arm on time
Disabled N Enabled
[2] Auto-arm on no movement
Disabled N Enabled
[3]& [4]
Auto-arm arming mode
N See Table N See Table
[5] Switch to stay arming if no entry delay is opened
Disabled N Enabled
[6]
Follow zones become entry delay 2 when delay zone is
bypassed
Disabled N Enabled
Section Data Description
[745] ____/____/____ (000 to 255) seconds Partition 1 exit delay (default 060)
[746] ____/____/____ (000 to 255) seconds Partition 2 exit delay (default 060)
[747] ____/____/____ (000 to 255) minutes Partition 1 bell cut-off (default 004)
[748] ____/____/____ (000 to 255) minutes Partition 2 bell cut-off (default 004)
[3] [4]
OFF OFF Regular
OFF ON Sleep
ON OFF Stay
[3] [4]
OFF OFF Regular
OFF ON Sleep
ON OFF Stay
To Next Page
Loading...
Need help?
General
