Paradox Esprit E65 User Manual

40 Programming Guide
Walk Test Mode
Installer and Maintenance Codes
WinLoad
Monitoring Phone #
Step Action Details
1
+ [
INSTALLER CODE] = flash. [MAINTENANCE CODE] may also be used.
2
3 [6] Activates or deactivates Walk Test Mode.
Step Action Details
1
+ [
INSTALLER CODE] = flash.
2
3 [7] = Installer Code
[8] = Maintenance Code
4 [
CODE]* Enter 4- or 6-digit code.* To erase a code, press the [SLEEP] key for 3 seconds.
5 [
CONFIRM CODE] Re-enter 4- or 6-digit code.
Step Action Details
1
+ [
INSTALLER CODE] = flash.
2
3 [9]
4 [
PHONE #] + [ENTER]* Enter PC phone # (up to 32 digits) and press [ENTER].
* To erase WinLoad phone #, panel ID, and PC password, press the [SLEEP] key for 3
seconds.
5 [
PANEL ID] Enter 4-digit Panel ID
6 [
PC PASSWORD] Enter 4-digit PC Password
Step Action Details
1
+ [
INSTALLER CODE] = flash.
2
3 [1]
4 [
PHONE #] + [ENTER]* Enter monitoring station phone # (up to 32 digits) and press [ENTER].
* To erase monitoring phone #, reporting format, and account #s, press the [SLEEP] key for
3 seconds.
5 [
PARTITION 1 ACCOUNT #]
6 [1] = CID
7 [P
ARTITION 2 ACCOUNT #]

Paradox Esprit E65 Specifications

General

Brand	Paradox
Model	Esprit E65
Category	Security System
Language	English