Paradox IPR512 Quick Start

IPR512-EQ03 09/2009 Page 5 PARADOX.COM
Step 11: Event Configuration
The Paradox reporting module will send a presence message (~100 bytes) at intervals defined by the Module Polling Time. If the
receiver does not receive at least one presence message from the module within the Receiver Supervision Time, the receiver can
report a communication loss to the Automation Software. For more information, refer to Step 12: Set Security Profile on page 6.
For more information on Receiver Events, refer to the IPR512 GPRS/IP Monitoring Receiver Operations Manual.
1) From the Main Menu, click Event Configuration.
2) Highlight the Account event.
3) Click the Edit button.
4) Select the Reported check box to activate reporting of the selected event.
5) Enter a report code (3 digits for CID format, 2 alphanumerics characters for SIA format). This report code will be reported in
CID or SIA format to the Automation Software whenever the selected event occurs. For account events, the receiver uses the
same report format used by the registered account. Receiver events are programmable.
6) Click the blue Save link.
1
3
2
4
5
6

Paradox IPR512 Specifications

General

Brand	Paradox
Model	IPR512
Category	Receiver
Language	English