Name: Paradox IPR512
Brand: Paradox
Rating: 5 (1 reviews)

To Next Page

IPR512: IP Monitoring Receiver 1 of 8 Quick Start

IPR512: IP Monitoring Receiver

Getting Started

The following instructions explain the basic connections and programming required to get your Paradox IP Monitoring

Receiver up and running. They also guide the installer on how to register the Paradox reporting module (IP100 Internet

Module or PCS100 Communicator Module - GPRS Edition) to the receiver. For more detailed information, please refer to

the IPR512 Operations Manual.

Figure 1: System Overview

Step 1: Connect COM1 (Automation Software)

Connect the receiver to a PC running the Automation Software. Connect the provided 3m (10ft) DB25 to DB9 cable

between the receiver’s COM1 connector and a COM port on the PC, or on the PC’s serial hub.

Step 2: Connect COM2 (Optional: Serial printer/PC)

This step is optional. Connect the receiver to a serial printer or to a PC running RS232 serial communication software. The

receiver sends reported events in plain text format through COM2 (RS-232), which can be printed or viewed. Connect a

serial cable between the receiver’s COM2 (DB9) connector and a COM port on the serial printer or PC (gender changer is

included).

Out of the Box (included): Additional Items Required (not included)

• Paradox IP Monitoring Receiver (IPR512)

• 1GB memory card

• 1.8m (6ft) power cable

• 3m (10ft) DB25 to DB9 serial cable for COM1

• DB9 gender changer

• Rack-mount kit (brackets and screws)

• Desktop installation kit (rubber feet)

• Removable connector for Input/Output Relay

• CAT5 network cable for LAN and WAN1/WAN2

• Optional: DB9 or DB25 serial cable (RS-232) for COM2

• Router and computer on a network to access internal web

page interface (LAN)

• Router on a network with internet access (WAN1) to receive

control panel report codes

Serial

LAN

WAN1

WAN2

COM1

COM2

Paradox Control

Panel

Paradox Internet

Module (IP100)

Paradox IP Monitoring

Receiver (IPR512)

Automation

Software

Serial printer/

Router

Routers

Web Page

Interface

Paradox Communicator Module -

GPRS Edition (PCS100)

COM 1

(PC)

COM

(SERIAL OUT)

LAN WAN

1 WAN 2

INPUT

TRIGGER

COM NO

OUTPUT

RELAY

PARADOX.COM