Paradox MG5000

Magellan & Spectra SP • Installation Guide
41
Section [552] (Repeater 1) and Section [562] (Repeater 2): Wireless Repeater Options
Enable or disable the repetition of zone signals in these sections. Enabling these options for zones means that the repeater will retransmit any signals relevant to
them.
Option [1] OFF= Repeat Wireless Zone 1 Signals (default)
Option [1] ON = Repeat Wireless Zone 1 Signals
Option [2] OFF= Repeat Wireless Zone 2 Signals (default)
Option [2] ON = Repeat Wireless Zone 2 Signals
Option [3] OFF= Repeat Wireless Zone 3 Signals (default)
Option [3] ON = Repeat Wireless Zone 3 Signals
Option [4] OFF= Repeat Wireless Zone 4 Signals (default)
Option [4] ON = Repeat Wireless Zone 4 Signals
Option [5] OFF= Repeat Wireless Zone 5 Signals (default)
Option [5] ON= Repeat Wireless Zone 5 Signals
Option [6] OFF= Repeat Wireless Zone 6 Signals (default)
Option [6] ON= Repeat Wireless Zone 6 Signals
Option [7] OFF= Repeat Wireless Zone 7 Signals (default)
Option [7] ON= Repeat Wireless Zone 7 Signals
Option [8] OFF= Repeat Wireless Zone 8 Signals (default)
Option [8] ON= Repeat Wireless Zone 8 Signals
Section [553] (Repeater 1) and Section [563] (Repeater 2): Wireless Repeater Options
Enable or disable the repetition of zone signals in these sections. Enabling these options for zones means that the repeater will retransmit any signals relevant to them.
Option [1] OFF= Repeat Wireless Zone 9 Signals (default)
Option [1] ON = Repeat Wireless Zone 9 Signals
Option [2] OFF= Repeat Wireless Zone 10 Signals (default)
Option [2] ON = Repeat Wireless Zone 10 Signals
Option [3] OFF= Repeat Wireless Zone 11 Signals (default)
Option [3] ON = Repeat Wireless Zone 11 Signals
Option [4] OFF= Repeat Wireless Zone 12 Signals (default)
Option [4] ON = Repeat Wireless Zone 12 Signals
Option [5] OFF= Repeat Wireless Zone 13 Signals (default)
Option [5] ON= Repeat Wireless Zone 13 Signals
Option [6] OFF= Repeat Wireless Zone 14 Signals (default)
Option [6] ON= Repeat Wireless Zone 14 Signals
Option [7] OFF= Repeat Wireless Zone 15 Signals (default)
Option [7] ON= Repeat Wireless Zone 15 Signals
Option [8] OFF= Repeat Wireless Zone 16 Signals (default)
Option [8] ON= Repeat Wireless Zone 16 Signals