Paradyne COMSPHERE 3610 - Page 7

7
Figure A
496-14702-01
S1
ON
2
ON
l
Switch 1
V.32
Analog
DBM
Interface
(S1-1)
Frame Ground/
Signal Ground
(S1-2)
Switch Setting Function
S1-1
V32
ON
(default)
Permissive transmit output level of –9 dBm
V.32
Analog
DBM only
OFF Programmable transmit output level between –12 dBm and
0 dBm
ON Frame ground (FG) connected to signal ground (SG)
S1-2
OFF
(default)
FG connected to SG through 100-ohm resistor
ON is to the rear as you face the front of the DSU.
OFF is to the front.