•
Paragon recommends that a factory dealer/technician program your tractor for optimal ECM/TCM performance.
•
Ensure the engine range RPM is programmed within the operational limits of the P657 Blower.
•
Ensure the engine RPM ramp up rate, after PTO engagement, is set for no more than 100 rpm per second.
•
Ensure the torque output settings are correct for the equipment operation parameters.
Note:
For more available options regarding ECM/TCM programming, please contact your local chassis dealer.
•
Engine is off and keys are not in the ignition.
•
Ensure all connections are supported.
•
Ensure the Camlock (discharge) connection is venting to atmosphere.
•
Ensure the air filter is properly installed and free of contaminates.
•
Ensure the P657 can be turned by hand.
•
Ensure all equipment supplied labels are installed.
•
Ensure all fasteners are installed and torqued properly.
•
Ensure ECM parameters are properly set (if applicable).
•
Ensure oil level is correct (see page 12 for details).
To Next Page
Loading...