•
Rotating shafts can be dangerous; you can snag clothes, skin, hair, hands, etc. This can cause serious
injury or death.
•
Do not work under the vehicle when the engine is running.
•
Do not work on a shaft (with or without a guard) when the engine is running.
•
Do not engage or disengage driven equipment by hand from under the vehicle when the engine is
running.
•
In order to avoid becoming entangled, install the power take off and/or shaft behind the frame rail, tanks,
battery box, etc.
•
If power take off and/or shaft are still exposed after installation, install a guard.
•
Use provided drive shaft flange set screws and apply “Loctite® 243” or equivalent.
•
Install a support strap when servicing a drive shaft to prevent personal injury.
A serious or fatal injury can occur. . .
-
if you lack proper training.
-
if you fail to follow proper precautions.
-
if you do not use proper tools and safety equipment.
-
if you assemble drive shaft components improperly.
-
if you use incompatible drive shaft components.
-
if you use worn-out or damaged drive shaft components.
-
if you use drive shaft components in a non-approved application.
This manual contains safety instructions. Read, understand, and follow this manual.
•
Get proper training.
•
Learn and follow safe operating procedures.
•
Use proper tools and safety equipment.
•
Use proper components in good condition.
To Next Page
Loading...