PARAMOUNT BED CA-54380 - Operation Procedures: Side-rail Integrated Panel Functions; Side-rail Integrated Panel Functions

21
●
The side-rail integrated panel includes switches for the following bed operations that are performed
by doctors and nurses.
●The side-rail integrated panel is available in both side-rails near to the headboard, on the right and
left side.
●
Do not allow persons other than doctors and nurses to operate the side-rail integrated panel. There
is a risk of injury due to incorrect operation.
(2) Chair position / Flat position buttons
・Chair position button : The back section base and the knee section base can
be raised simultaneously, and then the bed position is moved into Chair position.
・Flat position button : The bed position is moved into Flat position.
(3) Back raise adjustment buttons
The back section base angle can be adjusted.
(4) Knee raise adjustment buttons
The knee section base angle can be adjusted.
(5) Hi-lo adjustment buttons
The bed height can be adjusted.
(1) Trendelenburg / Reverse trendelenburg (TR / RTR) adjustment buttons
The inclination angle of the entire bed can be adjusted.
3. Side-rail integrated panel
(5)
(6)
(8)
(9)
(7)
(4)
(3)
(2)
(1)
(6) Lock button
Press the button to switch the side-rail integrated panel and the patient
control panel lock function ON or OFF.
If the lamp next to the button lights up in green, it indicates that the lock
function is ON.
(7)Electric CPR button
Press the button to move the back and knee section bases and inclination
bed to flat.
OPERATION PROCEDURES
6