Back raise adjustment buttons
●The back section base angle can be adjusted.
Knee raise adjustment buttons
●The knee section base angle can be adjusted.
The patient control panel is available in both side-rails near to the headboard, on the right and left side.
●The angle of the back section base and the knee section base can be smoothly adjusted with no
increments by using the patient control panel.
Pressing the button adjusts the bed, and releasing the button stops adjustment, allowing you to
adjust the bed to the desired position. Press the [↑] to raise the desired section and press [↓] button
to lower the desired section.
Do not allow the bed to be operated by a child aged 12 or under, or someone deemed incapable of
comprehending the operation of the bed. If a child aged 12 or under, or someone deemed incapable
of comprehending the operation (such as persons with dementia) operates the side-rail integrated
panel or the patient control panel by themselves, there is a risk of unexpected injury such as the
body getting caught in the bed by accident. If such person can come into contact with the side-rail
integrated panel or the patient control panel, unplug the power plug or press the lock button on the
side-rail integrated panel to disable the side-rail integratel panel and the patient control panel
operation in order to prevent accidents caused by incorrect operation.
Pressing two or more buttons simultaneously stops adjustment. If you stop adjustment by
pressing two or more buttons, remove your hands from all buttons and then perform
adjustment again.
To Next Page
Loading...
