Need help?Do you have a question about the Parasound NewClassic Model 5125 and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| S/N Ratio | > 100 dB |
| Power Output (8 Ohms) | 125 Watts |
| Power Output (4 Ohms) | 200W per channel |
| Input Impedance | 33k Ohms |
| Input Sensitivity | 1.0 V |
Guidance on ensuring correct speaker wire polarity when connecting to the amplifier terminals.
Explains the three modes (Manual, Audio, 12V Trigger) for automatic amplifier turn-on.
Details the 2.5mm jack for 12V trigger input and its use with trigger wires.
Explains the red protect indicator light and troubleshooting for fault conditions.
Details the red Hi-Temp indicator and causes such as overheating or low impedance loads.
Troubleshooting steps for when the amplifier produces no sound output.
Solutions for eliminating background hum, including ground loop issues.
To Next Page