Need help?Do you have a question about the Parasound HINT 6 and is the answer not in the manual?
General| Input Impedance | 47 kOhms |
|---|---|
| Weight | 33 lbs |
| Frequency Response | 10Hz - 100kHz (+0/-3dB) |
| Total Harmonic Distortion | < 0.05% at full power |
| Signal to Noise Ratio - Line Inputs | >100dB (A-weighted) |
| Signal to Noise Ratio - Phono Inputs | >85 dB, A-weighted |
| Phono Stage | MM/MC |
| DAC | ESS Sabre32 Reference |
| Dimensions | 17.25" W x 5.875" H x 16" D |
Details on warranty coverage, eligibility, and authorized dealer requirements for the HINT 6.
Specifies required airflow and spacing to prevent overheating the unit.
Instructions for securely mounting the HINT 6 in a standard 19-inch equipment rack.
Guides for connecting turntables and selecting appropriate phono cartridge load settings.
Details on RCA line level, balanced XLR, and front panel 3.5mm Aux inputs.
Explains how the HINT 6 functions as a pure power amplifier when bypassed.
How the receiver maintains control over volume and bass management in bypass mode.
Guide for connecting digital sources via Optical, Coax, or USB.
Instructions for connecting and playing audio from a PC or Mac via USB.
Steps for setting HINT 6 as the default audio output device on macOS.
Steps for setting HINT 6 as the default audio output device on Windows 10.
Details on connecting speakers and using preamp outputs for external amplification.
Information on connecting subwoofers using RCA or XLR outputs.
Explains trigger, IR input, and IR loop output for system integration.
Guides on setting the HINT 6's crossover and disabling subwoofer's internal crossover.
Instructions for setting the optimal subwoofer volume relative to main channels.
Details the function of the Sub Output and Preamp Output crossover switches.
Provides starting points for crossover frequencies based on speaker size.
Explains the function and color indications of the power button.
Details the headphone amplifier's capabilities and the muting function.
Describes the tone controls and their effect on audio output.
Explains the operation of volume, mute, dimming, and input selection functions.
Covers power, backlight, dim, mute, and volume controls on the remote.
Explains how to memorize volume levels and engage/disengage tone controls.
How to set a preferred volume level for when the unit is powered on.
Instructions for saving and recalling a preferred listening volume level.
Explains protection mechanisms for current overload, short circuits, and overheating.
Details the DC servo circuit for preventing speaker damage from DC offset.
Troubleshooting steps for issues with sound output and unit power.
Solutions for hum problems and loud volume with Bypass/Amp Input.
Contact details and procedures for obtaining repair service or technical assistance.
Requirements and conditions for returning the unit for warranty or repair service.
Technical details on power delivery, frequency range, and distortion levels.
Specifications for the digital-to-analog converter, USB controller, and other features.
To Next Page