Need help?Do you have a question about the Parasound Halo JC 3+ and is the answer not in the manual?
Frequency Response and Distortion| frequency response | 20 Hz – 20 kHz, +/- 0.2 dB |
|---|---|
| total harmonic distortion | < 0.01% at 1 kHz |
Signal to Noise Ratio| signal to noise ratio, MM, IHF A-weighted | 87 dB |
|---|---|
| signal to noise ratio, MM, unweighted | 78 dB |
| signal to noise ratio, MC, IHF A-weighted | 87 dB |
| signal to noise ratio, MC, unweighted | 67 dB |
Power Requirements| power on consumption | 12 watts |
|---|---|
| standby power consumption | 1 watt |
| AC power requirement | 115 or 230 VAC 50 - 60 Hz |
Input and Output Impedance| input impedance, MM | 47k Ω |
|---|---|
| input impedance, MC | 50 – 550 Ω variable, 47k Ω fixed |
| output impedance, unbalanced | < 100 Ω |
| output impedance, balanced | < 100 Ω per leg |
Gain and Sensitivity| total gain, MM | 48 dB |
|---|---|
| total gain, MC | 64 dB |
| input sensitivity at 1 kHz, MM | 4mV for 1 V output |
| input sensitivity at 1 kHz, MC | 600µV for 1 V output |
Weight and Dimensions| width | 17-1/4” (437mm) |
|---|---|
| depth | 13-3/4” (350mm) |
| height with feet | 4-1/8” (105mm) |
| height without feet | 3-1/2” (89mm) |
| net weight | 19 lbs. (8.6 Kg) |
| shipping weight | 26 lbs. (11.8 Kg) |
Avoid water, no object insertion, unplug for lightning, protect cords, correct power.
Refer servicing to qualified personnel; use specified replacement parts.
Warranty void if not purchased from an Authorized Dealer; contact for list.
Place on sturdy shelf, use long cables, ensure 22-inch width, route cables away from AC.
Position horizontally, avoid placing above power amp, ensure cabinet ventilation.
Select correct voltage (115V or 230V) on the underside before plugging in.
Minimize hum by placing unit away from power amps and routing cables carefully.
Select MM, MC Variable 50-550 Ω, or MC Fixed 47kΩ based on cartridge type.
Fine-tune MC impedance from 50 to 550 ohms for best system performance.
Check ground wire, polarity switch, cable routing, AC outlet, or line stage connection.
Contact dealer first, then Parasound Technical Service at 1-866-770-8324.
Obtain RA number, use original packing, insure unit, include purchase receipt.
Unit must be from authorized dealer, with receipt, and original owner.
To Next Page
