Parasound P/LD-1100 User Manual

Congratulations on your purchase of this precision audio component and thank you for your selection of
Parasound. Your P/LD-1100 Line Drive Preamplifier has been designed with the latest technology to
become the heart of the finest music systems. Premium parts and advanced design by renowned circuit
designer John Curl combined with full remote control make the P/LD-1100 one of the finest preamplifier
values ever offered.
Please take a few moments now to read these instructions thoroughly so you may fully understand the
sophisticated capabilities of your new preamplifier.
Unpacking and Placement
Open the carton of your P/LD-1100 carefully and inspect the unit for possible shipping damage. Report
any damage to your dealer immediately. You will find the detachable AC line cord packed separately
inside the carton.
Save your plastic bag, inserts, and carton. You may need these later for transporting the P/LD-1100 or for
shipment in the event it ever requires factory service. Record the serial number (on rear panel) here for
future reference: ____________________
Locate your P/LD-1100 as close as possible to your source components and power amplifier. Keep it out
of direct sunlight, and away from heat sources such as a hot air vent or radiator. If you are stacking your
components, avoid placing your P/LD-1100 on top of heat producing components, such as power
amplifiers or tube-type preamplifiers.
O W N E R ' S M A N U A L
P/LD-1100 Line Drive Preamplifier
P
/LD
-1100 Line D
rive P
ream
plifier
P/LD-1100 Line Drive Preamplifier
P
o
w
e
r
Power
M
u
te
Mute
T
a
p
e
Tape
A
u
x
Aux
V
id
e
o
Video
T
u
n
e
r
Tuner
C
D
CD
D
ire
c
t
Direct
B
a
la
n
c
e
Balance
V
o
lu
m
e
Volume

Parasound P/LD-1100 Specifications

General

Brand	Parasound
Model	P/LD-1100
Category	Amplifier
Language	English

Summary

Unpacking and Placement

Making Connections

Input Connections

Describes compatible analog line level sources and their sensitivity.

Tape Record/Playback Jacks

Connects analog tape decks to line output and input jacks for recording and playback.

Main Line Out Connectors

Provides two pairs of line output jacks for connecting to separate power amplifiers.

External Remote Control Input

Allows remote control operation from another room via infrared repeater systems.

DC Trigger Output

A +12 Volt DC trigger output for activating other equipment like relays or power amplifiers.

Headphone Jack

Features a high current, low noise headphone amplifier for headphones with 8 Ω or higher impedance.

AC Line Cord Receptacle

Connection point for the detachable AC line cord; advises against extension cords for sound quality.

Operating Your P/LD-1100

On-Off Switch Operation

Powers the unit on and off, with a delay for circuit stabilization after turning on.

Volume Control Adjustment

Adjusts listening level using a precision Alps potentiometer with motorized remote control.

Balance Control Adjustment

Adjusts relative left and right volume levels using a precision Alps 4-gang control.

Input Selection

Allows selection of the desired audio source, indicated by LEDs.

Mute Functionality

Mutes the signal at the line out jacks while keeping the headphone jack live.

Remote Control Operation

Duplicates front panel functions, has a 20-foot range, and uses AA alkaline batteries.

Burn-in Period

Maintaining Your P/LD-1100

Power Fuse

Explains the function of the power fuse and warns against using a higher value to maintain warranty.

Troubleshooting and Service

P/LD-1100 Specifications

Special Features Overview

Rewiring for 220-240V Operation

Parasound Limited Warranty