Need help?Do you have a question about the Parasound 200 Pre and is the answer not in the manual?
General| Type | Preamplifier |
|---|---|
| Inputs | 4 x RCA, 1 x XLR |
| Signal-to-Noise Ratio | > 100 dB |
| Total Harmonic Distortion | <0.01% |
| Input Impedance | 47 kΩ |
| Headphone Output | Yes |
| Subwoofer Output | Yes |
| Outputs | 1 x RCA, 1 x XLR |
| Frequency Response | 10 Hz - 100 kHz |
Connecting turntables (MM/MC) and line-level sources to Input 1.
How to connect a surround sound receiver to the Bypass Input jacks.
Methods for selecting the Bypass input when the unit is on or off.
Connecting to a power amplifier for variable output.
Details on the two subwoofer outputs: one with 80Hz crossover, one full-range.
Used to automatically turn on/off connected components like power amps.
Setting up the subwoofer connected to the >80Hz output.
Setting up the subwoofer connected to the Full Range output.
Adjusting the subwoofer's volume level for balanced bass.
How to adjust the volume level using the front panel knob.
Using the multifunction knob to cycle through and select audio inputs.
Diagnosing and resolving hum or buzzing noises from speakers.
Steps for obtaining warranty service and returning the unit.
Frequency response, THD, crosstalk, input sensitivity, S/N ratio.
DAC IC used and supported sampling rates.
To Next Page