Need help?Do you have a question about the Parasound 2250 v.2 and is the answer not in the manual?
Connecting preamplifier outputs to the amplifier's input jacks.
Adjusting the listening level for each channel independently.
Configures channels for single, higher-powered mono operation.
Step-by-step instructions to configure the amplifier for bridged mono.
Setting the load switch for various speaker impedances in mono mode.
Automatic turn-on via audio signal with adjustable sensitivity.
Automatic turn-on via a 9-12V external trigger signal.
Connects to AV receiver or preamp for trigger function.
Indicates protection circuit activation due to faults.
Indicates excessive operating temperature and protection activation.
Troubleshooting steps for when the unit fails to power on.
Troubleshooting steps for lack of audio output.
Troubleshooting steps for overheating or Hi-Temp indicator.
RMS power output ratings for various impedance loads.
To Next Page
General