Need help?Do you have a question about the Parasound 2125 v.2 and is the answer not in the manual?
Comprehensive safety guidelines for operating the Parasound Model 2125 v.2 amplifier.
Record serial number, dealer, and purchase date for warranty service.
Details on warranty eligibility and unauthorized dealer warnings.
Instructions for unpacking the amplifier and checking for shipping damage.
Recommendations for optimal placement and ventilation to prevent overheating.
Instructions for mounting the amplifier in a standard 19-inch equipment rack.
Details on the rear panel voltage selector switch and its importance.
Information regarding warranty coverage for incorrect AC voltage settings.
How to connect audio input cables and use loop out jacks.
Adjusting listening levels and operating speaker select buttons.
Using the bridged mono switch and high pass filter settings.
Connecting speakers, ensuring correct polarity and wire gauge.
Step-by-step guide for setting up the amplifier in bridged mono mode.
Specific instructions for the Speaker Load switch in bridged mono configurations.
Guide on using two amplifiers for bi-amping speakers for improved performance.
Examples of configurations requiring the 2-3 Ohm speaker load setting.
Explains manual, audio signal, and 12V trigger turn-on modes.
Details on 12V trigger inputs, loop out, and triggering multiple devices.
Guidance on connecting the AC power cord for optimal performance.
Operating the power button and understanding status indicators like Protect/Hi-Temp.
Using the A and B speaker select buttons on the front panel.
Solutions for unit not turning on, no sound, hum, or overheating.
How to contact Parasound for repair or service assistance.
Procedures and conditions for returning a unit to Parasound for service.
Criteria that make a unit ineligible for warranty repair.
Power output, distortion, frequency response, S/N ratio, damping factor.
Input impedance, sensitivity, trigger specs, AC power, dimensions, weight.
To Next Page
General