Parasound ZAMP User Manual

O W N E R ' S M A N U A L
Zamp / Zone Amplifier
Zam
p/Zone Am
plifier
A
uto O
n
A
C
P
resent
P
o
w
er
Congratulations on your purchase of this precision audio component and thank you for your selection of
Parasound. We designed the ZAMP for use in a wide variety of custom applications including multi-room
installations. The Zamp’s fully complementary discrete high-current design make it capable of driving
complex loudspeaker loads with ease.
Please take a few moments to read these instructions thoroughly so you may fully take advantage of the
versatility of your new Parasound amplifier.
Unpacking and Placement
Carefully unpack your ZAMP and its detachable AC cord. Be sure to inspect the unit for any possible
shipping damage. If you notice any, contact your Parasound Dealer immediately. Be sure to save your
packing cartons and the packing inserts for future transport and always pack the inner carton into a protective
outer carton before shipment.
Keep your Parasound Zamp out of direct sunlight and away from windows. Locate it away from heat sources
such as hot air ducts or radiators. Be sure to allow plenty of ventilation if you are installing the Zamp within
an equipment cabinet.
Before you proceed, find the serial number located on the rear panel of your amplifier and record it here
for reference:
Serial #____________________ Date of Purchase____________________

Parasound ZAMP Specifications

General

Power Output (8 Ohms)	45 Watts per channel
Signal to Noise Ratio	> 100 dB
Input Impedance	47 k Ohms
Total Harmonic Distortion	< 0.05 %
Input Sensitivity	1 V for full output

Summary

Unpacking and Placement

Important Safety Instructions

Safety Precautions and Warnings

Summarizes critical safety instructions and warnings regarding voltage, operation, and maintenance.

Zamp Front and Rear Panel Drawings

Zamp Front Panel Overview

Details the controls and indicators on the front panel of the ZAMP amplifier.

Zamp Rear Panel Overview

Details the connections, ports, and indicators on the rear panel of the ZAMP amplifier.

Making Connections to your ZAMP

AC Line Connection

Instructions for connecting the detachable audiophile-grade AC power cord.

Input Connections

Guide for connecting audio sources via RCA jacks.

Speaker Connections

Recommendations for connecting speakers, including wire gauge and terminals.

Polarity and Mono Bridge Switch

Explains speaker wire polarity and mono bridge switch operation.

Bridged Mono Operation Details

Specifics on connecting speakers in bridged mono mode and impedance considerations.

Operating Your ZAMP

Power Switch and Automatic Turn-On

Instructions for manual power control and automatic turn-on via DC trigger.

DC Trigger and Level Controls

Details on using the DC trigger input and adjusting input level controls.

Headphone Jack Operation

Information on using the headphone jack and its muting function.

Maintaining Your ZAMP

Troubleshooting and Service

Guidance for resolving problems, contacting support, and warranty service.

Power Fuse

Information on the location, function, and replacement of the power fuse.

Parasound ZAMP Specifications