Pard Leopard 640 - Picture in Picture; Auto Power off; Auto Recording

11
6. Picture in Picture
The PIP mode displays a 2x magnified center area in the top of the screen, allowing you to see
magnified target details without losing the field of view.
Press [Key 4] to enter the menu, press [Key 3] to move the cursor to the PIP setting
option, and press [Key 2] to enter the sub-menu.
Press [Key 1]/[Key 3] to move the cursor to select “PIP OFF” or “PIP ON”.
Press [Key 2] to save and return to the previous page.
7. Hot Track
The device can detect and display the highest temperature point on the screen, and
automatically track this target heat source.
Press [Key 4] to enter the menu, press [Key 3] to move the cursor to the hot track setting
option, and press [Key 2] to enter the sub-menu.
Press [Key 1]/[Key 3] to move the cursor to select “Off” or “On”.
Press [Key 2] to save and return to the previous page.
9. Auto Recording
After auto recording is on, device will start recording and continue to record after the next
startup.
Press [Key 4] to enter the menu, press [Key 3] to move the cursor to the auto recording
setting option and press [Key 2] to enter the sub-menu.
Press [Key 1]/[Key 3] to select “Off” or “On” options.
Press [Key 2] to save and return to the previous page.
8. Auto Power Off
After selecting your preferred time duration, the device will sense the last point of
operation before beginning the shutdown. Auto power off will start after the device has
been idle then it automatically triggers the auto power off command.
Press [Key 4] to enter the menu, press [Key 3] move the cursor to select the auto power
off setting, and press [Key 2] to enter the sub-menu.
Press [Key 1]/[Key 3] to select "Off", "1 minute", "10 minutes" or "30 minutes"
duration options. After selection, press [Key 2] to save and return to the previous page.